Page 16 from comparison Samsung Mx T40

4 comparisons are ready for you on this page

Compare Jbl Charge 5with Samsung Mx T40

Feature

Jbl Charge 5

Samsung Mx T40

Equivalent Name -
General Grouping Desktop Portable
Connection Type Wireless and Wired Wireless
Actual Output Power (RMS)
Speaker Design -
Number of Treble Drivers 2 piece 1 piece
Tweeter Amplifier Power
Number of Bass Drivers 2 piece 1 piece
Woofer Amplifier Power
Impedance 4 ohm (Ω) -
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
RCA Input Port true false
Optical Input false false
Coaxial Port false false
TF Card Support false false
USB Port true true
Headphone Output Port true false
Microphone Input Port true false
Microphone input port type 6.35mm -
Internal Microphone false false
Voice Call Support false false
Hi-Res Support false false
IPX Resistance Yes IP67 (Dust and water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability false false
Controller Details Power button / Lighting mode change button / Source selection button / Volume buttons / Playback control button / Dynamic Bass on/off button / Bluetooth on/off button / TWS buttons Power button / Bluetooth on/off button / Playback control button / Volume buttons / PartyBoost button
Bluetooth Support true true
Operational Range 10 meter (m) -
NFC Support false false
Software Features Sound Tower app for sound and lighting customization (Compatible with Android 6.0 or later and iOS 10.0 or later) Dedicated JBL PORTABLE app for sound customization
LED Status Indicator true true
Power Source Type Mains power -
Power Consumption In use: 35W / Standby mode: 0.5W 5V / 3A
Current and Voltage -
Body Material Plastic Plastic
Lighting true false
Lighting Details -
Other Design Features Has LED display / Has stand for mobile phone -
Size and Dimensions 291.5 * 268 * 530.5 millimeter (mm) 94 * 96.5 * 223 millimeter (mm)
Product Weight 6800 gram (g) 960 gram (g)
Treble Driver Size (Tweeter) - 20 millimeter (mm)
Bass Driver Size - 52 millimeter (mm)
Driver Technical Specifications - 90 x 52 mm woofer
Frequency Response Range - 60-20000 hertz (hz)
Signal-to-Noise Ratio (S/N Ratio) -
Remote Control - false
Available Bluetooth Version -
Wireless Connection Details - Signal transmission power less than 20 dBm (Bluetooth connection) / Signal transmission frequency 2.400 to 2.4835 GHz (Bluetooth connection) / Signal transmission modulation GFSK, π/4 DQPSK, 8DPSK
Additional Features - PartyBoost technology for connecting two or more JBL speakers for stereo sound / JBL Radiator technology and use of two passive radiators for enhanced Bass quality / Ability to charge mobile phones via USB port
Battery Capacity - 7500mAh
Battery Technology - Lithium Polymer
Charging Method - Via USB Type-C port
Time to Full Charge - Approximately 4 hours

Compare Anker Soundcore Flare 2with Samsung Mx T40

Feature

Anker Soundcore Flare 2

Samsung Mx T40

Equivalent Name Anker A3165
General Grouping Desktop Portable
Connection Type Wireless and Wired Wireless
Actual Output Power (RMS)
Speaker Design -
Number of Treble Drivers 2 piece -
Tweeter Amplifier Power -
Number of Bass Drivers 2 piece -
Woofer Amplifier Power -
Impedance 4 ohm (Ω) -
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
RCA Input Port true false
Optical Input false false
Coaxial Port false false
TF Card Support false false
USB Port true false
Headphone Output Port true false
Microphone Input Port true false
Microphone input port type 6.35mm -
Internal Microphone false true
Voice Call Support false true
Hi-Res Support false false
IPX Resistance Yes IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability false false
Controller Details Power button / Lighting mode change button / Source selection button / Volume buttons / Playback control button / Dynamic Bass on/off button / Bluetooth on/off button / TWS buttons Power button / Volume buttons / Shared button for playback control and call answer/end / Bass Boost activation button / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
Bluetooth Support true true
Operational Range 10 meter (m) 20 meter (m)
NFC Support false false
Software Features Sound Tower app for sound and lighting customization (Compatible with Android 6.0 or later and iOS 10.0 or later) Dedicated Soundcore app for lighting customization
LED Status Indicator true true
Power Source Type Mains power -
Power Consumption In use: 35W / Standby mode: 0.5W 10W (5V / 2A)
Current and Voltage -
Body Material Plastic Plastic
Lighting true true
Lighting Details
Other Design Features Has LED display / Has stand for mobile phone -
Size and Dimensions 291.5 * 268 * 530.5 millimeter (mm) 89 * 89 * 160 millimeter (mm)
Product Weight 6800 gram (g) 585 gram (g)
Output Power Details - 2 x 10W
Driver Technical Specifications - Equipped with two drivers / Has passive radiator
Remote Control - false
Available Bluetooth Version -
Additional Features - 360° Sound / DSP technology for sound quality enhancement / BassUp technology for enhancing bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound
Battery Capacity - 5200mAh
Battery Technology - Lithium-Ion
Charging Method - Via USB Type-C port
Time to Full Charge - Approximately 3.5 hours

Compare Jbl Flip 5with Samsung Mx T40

Feature

Jbl Flip 5

Samsung Mx T40

Equivalent Name -
General Grouping Desktop Portable
Connection Type Wireless and Wired Wireless
Actual Output Power (RMS)
Speaker Design -
Number of Treble Drivers 2 piece -
Tweeter Amplifier Power -
Number of Bass Drivers 2 piece -
Woofer Amplifier Power -
Impedance 4 ohm (Ω) -
Audio Input Jack Support true false
Audio Input Jack Type 3.5mm -
RCA Input Port true false
Optical Input false false
Coaxial Port false false
TF Card Support false false
USB Port true false
Headphone Output Port true false
Microphone Input Port true false
Microphone input port type 6.35mm -
Internal Microphone false false
Voice Call Support false false
Hi-Res Support false false
IPX Resistance Yes IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability false false
Controller Details Power button / Lighting mode change button / Source selection button / Volume buttons / Playback control button / Dynamic Bass on/off button / Bluetooth on/off button / TWS buttons Power button / Bluetooth on/off button / Playback control button / Volume buttons / PartyBoost button
Bluetooth Support true true
Operational Range 10 meter (m) -
NFC Support false false
Software Features Sound Tower app for sound and lighting customization (Compatible with Android 6.0 or later and iOS 10.0 or later) Dedicated JBL Connect app for sound customization
LED Status Indicator true true
Power Source Type Mains power -
Power Consumption In use: 35W / Standby mode: 0.5W 5V / 3A
Current and Voltage -
Body Material Plastic Plastic and Fabric
Lighting true false
Lighting Details -
Other Design Features Has LED display / Has stand for mobile phone Strap attachable
Size and Dimensions 291.5 * 268 * 530.5 millimeter (mm) 69 * 74 * 181 millimeter (mm)
Product Weight 6800 gram (g) 540 gram (g)
Driver Technical Specifications - 80 x 44 mm transducer
Frequency Response Range - 65-20000 hertz (hz)
Signal-to-Noise Ratio (S/N Ratio) -
Remote Control - false
Available Bluetooth Version -
Wireless Connection Details -
Additional Features - PartyBoost technology for connecting two or more JBL speakers for stereo sound
Battery Capacity - 4800 mAh
Battery Technology - Lithium Polymer
Charging Method - Via USB Type-C port
Time to Full Charge - Approximately 2.5 hours

Compare Samsung Mx T40with Tsco Ts 2343

Feature

Samsung Mx T40

Tsco Ts 2343

Equivalent Name -
General Grouping Desktop Portable
Connection Type Wireless and Wired Wireless and Wired
Actual Output Power (RMS)
Speaker Design -
Number of Treble Drivers 2 piece -
Tweeter Amplifier Power -
Number of Bass Drivers 2 piece -
Woofer Amplifier Power -
Impedance 4 ohm (Ω) -
Audio Input Jack Support true true
Audio Input Jack Type 3.5mm 3.5mm
RCA Input Port true false
Optical Input false false
Coaxial Port false false
TF Card Support false true
USB Port true true
Headphone Output Port true false
Microphone Input Port true false
Microphone input port type 6.35mm -
Internal Microphone false false
Voice Call Support false false
Hi-Res Support false false
IPX Resistance Yes No
Microphone Noise Cancelling Capability false false
Controller Details Power button / Lighting mode change button / Source selection button / Volume buttons / Playback control button / Dynamic Bass on/off button / Bluetooth on/off button / TWS buttons
Bluetooth Support true true
Operational Range 10 meter (m) 10 meter (m)
NFC Support false false
Software Features Sound Tower app for sound and lighting customization (Compatible with Android 6.0 or later and iOS 10.0 or later) -
LED Status Indicator true true
Power Source Type Mains power -
Power Consumption In use: 35W / Standby mode: 0.5W -
Current and Voltage -
Body Material Plastic Plastic and Metal
Lighting true false
Lighting Details -
Other Design Features Has LED display / Has stand for mobile phone Has handle for easy carrying
Size and Dimensions 291.5 * 268 * 530.5 millimeter (mm) 81 * 103 * 206 millimeter (mm)
Product Weight 6800 gram (g) 495 gram (g)
Remote Control - false
Available Bluetooth Version -
Additional Features - Radio playback capability
Battery Capacity - 1200mAh
Battery Technology - Lithium Polymer
Charging Method - Via Micro USB port
Standby Battery Life - 22 hour (h)
Time to Full Charge - Approximately 3.5 hours
Rated Output Power (PMPO) -
Output Power Details - Two 3W
Sound Sensitivity (dB) - 85 decibel (db)
Frequency Response Range - 100-18000 hertz (hz)