Anker Soundcore Flare Plus
VS
Yamaha Stagepas 1K
Feature Comparison
General specifications
General specifications
| Equivalent Name | Anker A3162 | - |
|---|
Main features
Main features
| General Grouping | Portable | Desktop |
|---|---|---|
| Connection Type | Wireless and Wired | Wireless and Wired |
| Actual Output Power (RMS) | ||
| Output Power Details | - | Subwoofer 810W / Speaker 190W |
Technical features
Technical features
| Driver Technical Specifications | Equipped with four drivers / Has two passive radiators | 1 x 304.8mm driver / 10 x 38.1mm drivers |
|---|---|---|
| Sound Sensitivity (dB) | - | 119 decibel (db) |
| Frequency Response Range | - | 37-20000 hertz (hz) |
Ports and features
Ports and features
| Audio Input Jack Support | Yes | Yes |
|---|---|---|
| Audio Input Jack Type | 3.5mm | - |
| RCA Input Port | No | No |
| Optical Input | No | No |
| Coaxial Port | No | No |
| TF Card Support | No | No |
| USB Port | Yes | No |
| Headphone Output Port | No | Yes |
| Microphone Input Port | No | Yes |
| Internal Microphone | Yes | No |
| Voice Call Support | Yes | No |
| Hi-Res Support | No | No |
| IPX Resistance | IPX7 (Water resistant up to 1 meter deep for up to 30 minutes) | No |
| Microphone input port type | - |
Other technical features
Other technical features
| Remote Control | No | No |
|---|
Microphone features
Microphone features
| Microphone Noise Cancelling Capability | No | No |
|---|
Connections
Connections
| Controller Details | Power button / Volume buttons / Shared button for playback control and call answer/end / Bass Boost activation button / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast | Power button, REVERB adjustment knobs, EQ adjustment knobs, LEVEL adjustment knobs, Shared switch for Microphone and LEVEL, Hi-Z switch, Monitor control knob, REVERB TYPE/TIME adjustment knob, Sound mode adjustment knob, MASTER LEVEL adjustment knob |
|---|---|---|
| Bluetooth Support | Yes | Yes |
| Available Bluetooth Version | ||
| Operational Range | 20 meter (m) | - |
| NFC Support | No | No |
| Wireless Connection Details | - | SCMS-T signal transmission modulation / Signal transmission frequency 2.402 to 2.480 GHz (Bluetooth connection) |
Additional features and options
Additional features and options
| Software Features | Dedicated Soundcore app for sound and lighting customization | - |
|---|---|---|
| LED Status Indicator | Yes | Yes |
Capabilities
Capabilities
| Additional Features | 360-degree sound / BassUp technology for enhanced bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound / Ability to charge mobile phones via USB port (5W) | Sound coverage angle: 170° horizontal and 30° vertical / 5 Mix channels / LINK input / REVERB FOOT SW input / ST input / Guitar input / LINK output / Mono monitoring output / Features 4 reverb types (HALL, PLATE, ROOM, ECHO) / Features 3 sound modes (Speech, Music, Club) |
|---|
Power supply and battery life
Power supply and battery life
| Charging Method | Via Micro USB port | - |
|---|---|---|
| Time to Full Charge | Approximately 4 hours | - |
| Power Consumption | 10W (5V / 2A) | - |
| Power Source Type | - | Mains power |
Aesthetic features
Aesthetic features
| Body Material | Plastic | - |
|---|---|---|
| Lighting | Yes | No |
| Other Design Features | Has fan vents / Has handle for easy carrying / Supports DL-SP1K wheeled stand for easy carrying | |
| Size and Dimensions | 100 * 100 * 182 millimeter (mm) | 67 x 86 x 582 mm (linear speaker) / 334 x 418 x 550 mm (subwoofer) / 334 x 418 x 2000 mm (total) |
| Product Weight | 853 gram (g) | Line Array Speaker: 1.8 kg / Subwoofer: 20 kg / Total: 23 kg |
Other features
Other features
| Current and Voltage | - |
|---|
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Anker Soundcore Flare Plus
0
/10
from total 1 Vote
Yamaha Stagepas 1K
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
