Jbl Go 3
VS
Anker Soundcore Pro Plus
Feature Comparison
Main features
Main features
| General Grouping | Portable | Portable |
|---|---|---|
| Connection Type | Wireless | Wireless and Wired |
| Actual Output Power (RMS) | ||
| Output Power Details | - | 2 x 12.5W |
Technical features
Technical features
| Driver Technical Specifications | 47 x 43 mm transducer (1.5 inch) | 2 x 44.4mm drivers |
|---|---|---|
| Frequency Response Range | 110-20000 hertz (hz) | 65-20000 hertz (hz) |
| Number of Treble Drivers | - | 2 piece |
| Treble Driver Size (Tweeter) | - | 25.4 millimeter (mm) |
| Impedance | - | 4 ohm (Ω) |
Technical details of the microphone
Technical details of the microphone
| Signal-to-Noise Ratio (S/N Ratio) | - |
|---|
Ports and features
Ports and features
| Audio Input Jack Support | No | Yes |
|---|---|---|
| RCA Input Port | No | No |
| Optical Input | No | No |
| Coaxial Port | No | No |
| TF Card Support | No | No |
| USB Port | No | No |
| Headphone Output Port | No | No |
| Microphone Input Port | No | No |
| Internal Microphone | No | Yes |
| Voice Call Support | No | Yes |
| Hi-Res Support | No | No |
| IPX Resistance | IP67 (Dust and water resistant up to 1 meter deep for up to 30 minutes) | |
| Audio Input Jack Type | - | 3.5mm |
Other technical features
Other technical features
| Remote Control | No | No |
|---|
Microphone features
Microphone features
| Microphone Noise Cancelling Capability | No | - |
|---|
Connections
Connections
| Controller Details | Power button / Bluetooth on/off button / Playback control button / Volume buttons | Power button / Bluetooth button / Multi-function button / Shared buttons for volume adjustment and playback control |
|---|---|---|
| Bluetooth Support | Yes | Yes |
| Available Bluetooth Version | ||
| Wireless Connection Details | Signal transmission power less than 8 dBm (Bluetooth connection) / Signal transmission frequency 2.402 to 2.480 GHz (Bluetooth connection) / Signal transmission modulation GFSK, π/4 DQPSK, 8DPSK | - |
| NFC Support | No | Yes |
| Operational Range | - | 20 meter (m) |
Power supply and battery life
Power supply and battery life
| Battery Capacity | 2.775Wh | 8000mAh |
|---|---|---|
| Battery Technology | Lithium Polymer | Lithium-Ion |
| Charging Method | Via USB Type-C port | Via Micro USB port |
| Time to Full Charge | Approximately 2.5 hours | Approximately 6 hours |
| Power Consumption | 5V / 1A | 10W (5V / 2A) |
Aesthetic features
Aesthetic features
| Body Material | Plastic and Fabric | Plastic |
|---|---|---|
| Lighting | No | No |
| Other Design Features | Strap attachable | Has silicone pads under speaker to prevent movement and slipping |
| Size and Dimensions | 41.3 * 75 * 87.5 millimeter (mm) | 69 * 72 * 204 millimeter (mm) |
| Product Weight | 209 gram (g) | 760 gram (g) |
Additional features and options
Additional features and options
| LED Status Indicator | Yes | Yes |
|---|
General specifications
General specifications
| Equivalent Name | - |
|---|
Capabilities
Capabilities
| Additional Features | - | Ability to charge other devices via USB port (10W) |
|---|
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Jbl Go 3
0
/10
from total 1 Vote
Anker Soundcore Pro Plus
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
