Boya By M1Dm
VS
Deepcool Fk120
Feature Comparison
Main features
Main features
| Number of Microphones | 2 piece | - |
|---|---|---|
| Microphone Type by Application | Lavalier | - |
| Microphone Technology Type | Electret condenser | - |
| Connection Type | Wired | - |
| Transmitter/Receiver Combination | Without independent receiver and transmitter | - |
Technical details of the microphone
Technical details of the microphone
| Diaphragm diameter size | 53.3 millimeter (mm) | - |
|---|---|---|
| Sound Sensitivity | - | |
| Headphone Output Impedance | 1000 ohm (Ω) | - |
| Signal-to-Noise Ratio (S/N Ratio) | 74 decibel (db) | - |
Technical features
Technical features
| Frequency Response Range | 65-18000 hertz (hz) | - |
|---|---|---|
| Fan Type | - | |
| Hub | - | No |
| Fan Motor Technology Type | - | |
| Maximum Rated Rotation Speed | - | 1850 RPM |
| Minimum RPM (Revolutions Per Minute) | - | 500 RPM |
| Fan Speed Control Method | - | |
| Maximum Noise Level | - | 28 decibel (db) |
| Fan Operating Voltage | - | 12 volt (v) |
| Fan Operating Current | - | 0.12 ampere (a) |
Aesthetic and supplementary features
Aesthetic and supplementary features
| Microphone Cable Length | 4 meter (m) | - |
|---|
Aesthetic features
Aesthetic features
| Body Material | Plastic | - |
|---|---|---|
| Product Weight | 68 gram (g) | 170 gram (g) |
| Size and Dimensions | - | 25 * 120 * 120 millimeter (mm) |
| Lighting | - | No |
Appearance and design
Appearance and design
| Dimensional Class | - | 120mm |
|---|
Fan features
Fan features
| Maximum Airflow Capacity (CFM) | - | 68.99 cubic feet per minute (cfm) |
|---|---|---|
| Maximum fan airflow pressure (mm/H2O) | - | 2.19 mm H₂O |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Boya By M1Dm
0
/10
from total 1 Vote
Deepcool Fk120
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
