Boya By M2D
VS
Lian Li Uni Sl120 3 Pack
Feature Comparison
Main features
Main features
| Number of Microphones | 2 piece | - |
|---|---|---|
| Microphone Type by Application | Lavalier | - |
| Connection Type | Wired | - |
| Transmitter/Receiver Combination | Without independent receiver and transmitter | - |
Technical features
Technical features
| Frequency Response Range | 50-20000 hertz (hz) | - |
|---|---|---|
| Fan Type | - | |
| RGB Connector Type for Motherboard | - | 3-pin |
| Hub | - | Yes |
| Fan Motor Technology Type | - | |
| Maximum Rated Rotation Speed | - | 1900 RPM |
| Minimum RPM (Revolutions Per Minute) | - | 800 RPM |
| Fan Speed Control Method | - | |
| Maximum Noise Level | - | 31 decibel (db) |
| Fan Operating Voltage | - | 12 volt (v) |
| Fan Operating Current | - | 0.1 ampere (a) |
| Required Lighting Voltage | - | 5 volt (v) |
| Required Lighting Current | - | 0.34 ampere (a) |
Technical details of the microphone
Technical details of the microphone
| Sound Sensitivity | - | |
|---|---|---|
| Bitrate | 24 bit | - |
| Signal-to-Noise Ratio (S/N Ratio) | - |
Aesthetic and supplementary features
Aesthetic and supplementary features
| Microphone Cable Length | 6 meter (m) | - |
|---|
Aesthetic features
Aesthetic features
| Product Weight | 80 gram (g) | - |
|---|---|---|
| Size and Dimensions | - | 25 * 120 * 120 millimeter (mm) |
| Lighting | - | Yes |
Appearance and design
Appearance and design
| Dimensional Class | - | 120mm |
|---|
Fan features
Fan features
| Maximum Airflow Capacity (CFM) | - | 58.54 cubic feet per minute (cfm) |
|---|---|---|
| Maximum fan airflow pressure (mm/H2O) | - | 2.54 mm H₂O |
Lighting features
Lighting features
| Lighting system type | - |
|---|
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Boya By M2D
0
/10
from total 1 Vote
Lian Li Uni Sl120 3 Pack
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
