Boya By M4C
VS
Yanmai Gf525
Feature Comparison
Main features
Main features
| Number of Microphones | 1 piece | 2 piece |
|---|---|---|
| Microphone Type by Application | Lavalier | Lavalier |
| Microphone Technology Type | Condenser | Condenser |
| Connection Type | Wired | Wireless |
| Transmitter/Receiver Combination | Without independent receiver and transmitter | Transmitter and microphone integrated with independent receiver |
| Optimal Operating Range | - | 30 meter (m) |
Technical features
Technical features
| Frequency Response Range | 35-18000 hertz (hz) | 20-20000 hertz (hz) |
|---|
Technical details of the microphone
Technical details of the microphone
| Sound Sensitivity | - | |
|---|---|---|
| Microphone Impedance | 200 ohm (Ω) | - |
| Signal-to-Noise Ratio (S/N Ratio) | 78 decibel (db) | 90 decibel (db) |
| Microphone Voltage and Current Consumption | 48 volt (v) | - |
Aesthetic and supplementary features
Aesthetic and supplementary features
| Microphone Cable Length | 2 meter (m) | - |
|---|---|---|
| Headphone Monitoring Output | - | 3.5mm jack |
Transmitter technical details
Transmitter technical details
| Transmitter Battery Power | - | |
|---|---|---|
| Transmitter Voltage and Current Consumption | - | |
| Transmitter Operating Time | - | Up to 10 hours |
Receiver technical details
Receiver technical details
| Receiver Battery Power | - | |
|---|---|---|
| Receiver Voltage and Current Consumption | - | |
| Receiver Operating Time | - | Up to 10 hours |
Aesthetic features
Aesthetic features
| Size and Dimensions | - | 13 x 44 x 45 mm (transmitter) / 13 x 44 x 45 mm (receiver) |
|---|---|---|
| Product Weight | - | Transmitter: 29 g / Receiver: 29 g |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Boya By M4C
0
/10
from total 1 Vote
Yanmai Gf525
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
