Boya By Wm8 Pro K2
VS
Synco Lav S8
Feature Comparison
Main features
Main features
| Number of Microphones | 2 piece | 1 piece |
|---|---|---|
| Microphone Type by Application | Lavalier | Lavalier |
| Connection Type | Wireless | Wired |
| Transmitter/Receiver Combination | Transmitter and receiver independent of microphone | Without independent receiver and transmitter |
| Optimal Operating Range | 100 meter (m) | - |
| Microphone Technology Type | - | Electret condenser |
Technical features
Technical features
| Frequency Response Range | 35-18000 hertz (hz) | 50-20000 hertz (hz) |
|---|
Technical details of the microphone
Technical details of the microphone
| Sound Sensitivity | ||
|---|---|---|
| Headphone Output Impedance | 16 ohm (Ω) | - |
| Signal-to-Noise Ratio (S/N Ratio) | 74 decibel (db) | 75 decibel (db) |
| Total Harmonic Distortion (THD) | 0.5 percent (%) | - |
| Microphone Impedance | - | |
| Microphone Battery Capacity | - | 800 hour (h) |
Transmitter technical details
Transmitter technical details
| RF Output Power | Less than 10 mW | - |
|---|---|---|
| Transmitter Operating Time | Up to 6 hours | - |
Receiver technical details
Receiver technical details
| Receiver Operating Time | Up to 4 hours | - |
|---|
Aesthetic and supplementary features
Aesthetic and supplementary features
| Microphone Cable Length | 1.2 meter (m) | 8 meter (m) |
|---|---|---|
| Headphone Monitoring Output | 3.5mm jack | - |
Aesthetic features
Aesthetic features
| Size and Dimensions | 29 x 67 x 208 mm (receiver) / 29 x 67 x 208 mm (transmitter) | 17 * 17 * 53 millimeter (mm) |
|---|---|---|
| Product Weight | 90g (receiver, without battery) ** 80g (transmitter, without battery) | - |
| Body Material | - | Plastic |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Boya By Wm8 Pro K2
0
/10
from total 1 Vote
Synco Lav S8
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
