Price Comparison
VS
No stores registered at this time
Rode Nt Usb
VS
Boya By Xm6 K6
Feature Comparison
Main features
Main features
| Number of Microphones | 1 piece | 2 piece |
|---|---|---|
| Microphone Type by Application | Studio | Lavalier |
| Microphone Technology Type | Condenser | - |
| Connection Type | Wired | Wireless |
| Transmitter/Receiver Combination | Without independent receiver and transmitter | Transmitter and microphone integrated with independent receiver |
| Optimal Operating Range | - | 100 meter (m) |
Technical details of the microphone
Technical details of the microphone
| Diaphragm diameter size | 12.7 mm | - |
|---|---|---|
| Bitrate | 16 bit | - |
| Microphone Voltage and Current Consumption | 5 volt (v) | - |
| Sound Sensitivity | - | |
| Signal-to-Noise Ratio (S/N Ratio) | - |
Technical features
Technical features
| Frequency Response Range | 20-20000 hertz (hz) | 35-18000 hertz (hz) |
|---|
Aesthetic and supplementary features
Aesthetic and supplementary features
| Headphone Monitoring Output | 3.5mm jack | 3.5mm jack |
|---|
Aesthetic features
Aesthetic features
| Size and Dimensions | 50 * 62 * 184 millimeter (mm) | 16.5 x 31.6 x 62.1 mm (transmitter) / 12 x 23.15 x 75.6 mm (receiver) / 35.6 x 96.8 x 125 mm (charging case) |
|---|---|---|
| Product Weight | 520 gram (g) | 32 g (Transmitter) / 14.5 g (Receiver) / 195 g (Charging Case) |
Transmitter technical details
Transmitter technical details
| Transmitter RF Modulation Type | - | |
|---|---|---|
| RF Output Power | - | Less than 10 mW |
| Transmitter Operating Time | - | Up to 7 hours |
Receiver technical details
Receiver technical details
| Receiver RF Modulation Type | - |
|---|
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Rode Nt Usb
0
/10
from total 1 Vote
Boya By Xm6 K6
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
