Rode Wireless Go Ii Single
VS
Comica Cvm Vm10Ii
Feature Comparison
Main features
Main features
| Number of Microphones | 1 piece | 1 piece |
|---|---|---|
| Microphone Type by Application | Lavalier | Shotgun |
| Microphone Technology Type | Condenser | Condenser |
| Connection Type | Wireless | Wired |
| Transmitter/Receiver Combination | Transmitter and microphone integrated with independent receiver | Without independent receiver and transmitter |
| Optimal Operating Range | 200 meter (m) | - |
Technical features
Technical features
| Frequency Response Range | 50-20000 hertz (hz) | 60-20000 hertz (hz) |
|---|---|---|
| Noise Level | 22 decibel (db) | - |
Technical details of the microphone
Technical details of the microphone
| Gain Adjustment Range | - | |
|---|---|---|
| Sound Sensitivity | ||
| Signal-to-Noise Ratio (S/N Ratio) | - | |
| Microphone Voltage and Current Consumption | - | 5 volt (v) |
Transmitter technical details
Transmitter technical details
| Transmitter Voltage and Current Consumption | - | |
|---|---|---|
| Transmitter Operating Time | Up to 7 hours | - |
Receiver technical details
Receiver technical details
| Receiver Voltage and Current Consumption | - | |
|---|---|---|
| Receiver Operating Time | Up to 7 hours | - |
Aesthetic and supplementary features
Aesthetic and supplementary features
| Headphone Monitoring Output | 3.5mm jack | - |
|---|
Aesthetic features
Aesthetic features
| Body Material | Plastic | Metal |
|---|---|---|
| Size and Dimensions | 18.3 x 44 x 45.3 mm (transmitter) / 18.3 x 44 x 45.5 mm (receiver) | 21 * 21 * 85 millimeter (mm) |
| Product Weight | 30 g (Transmitter) / 32 g (Receiver) | 34.2 gram (g) |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Rode Wireless Go Ii Single
0
/10
from total 1 Vote
Comica Cvm Vm10Ii
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
