Price Comparison
No stores registered at this time
VS
Cooler Master Blizzard T400I Red
VS
Gamdias Boreas E1 410
Feature Comparison
Heat sink details
Heat sink details
| Heat Sink Size | 60 * 116 * 160 millimeter (mm) | - |
|---|---|---|
| Heatsink material type | Aluminum | Aluminum |
Heat pipe features
Heat pipe features
| Heat Pipe Type | U-shaped | - |
|---|---|---|
| Heat Pipe Material and Contact Surface | Copper | - |
| Heat Pipe Diameter | 6 millimeter (mm) | - |
Fan features
Fan features
| Fan Core Technology | ||
|---|---|---|
| Fan Speed Control System | ||
| Maximum Airflow Capacity (CFM) | 66.3 cubic feet per minute (cfm) | 70.2 cubic feet per minute (cfm) |
| Fan Electrical Connector Type | 4-pin PWM | 4-pin PWM |
| Maximum Air Pressure (mm/H2O) | - | 2.7 mm H₂O |
| Fan Operating Voltage | - | 12 volt (v) |
Cooling system details
Cooling system details
| Minimum nominal rotation speed | 600 RPM | 800 RPM |
|---|---|---|
| Maximum nominal rotation speed | 1600 RPM | 2000 RPM |
Air conditioning features
Air conditioning features
| Maximum noise produced | 31 decibel (db) | 31 decibel (db) |
|---|---|---|
| Minimum noise produced | 9 decibel (db) | 10 decibel (db) |
Aesthetic features
Aesthetic features
| Lighting | Yes | Yes |
|---|---|---|
| Total Device Weight | 705 gram (g) | - |
Lighting features
Lighting features
| Lighting system type | ||
|---|---|---|
| Lighting connector type | - | 3-pin |
| Lighting voltage | - | 5 volt (v) |
General features
General features
| Mounting Method on Motherboard | Vertical | - |
|---|---|---|
| Overall dimensions | 84 * 120 * 160 millimeter (mm) | 73.8 * 120 * 154.5 millimeter (mm) |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Cooler Master Blizzard T400I Red
0
/10
from total 1 Vote
Gamdias Boreas E1 410
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
