Green Tinycool 90 Rev11
VS
Cooler Master Hyper 103
Feature Comparison
Heat sink details
Heat sink details
| Heat Sink Size | 53 * 108 * 112 millimeter (mm) | 91 * 96 * 138.5 millimeter (mm) |
|---|---|---|
| Heatsink weight | 170 gram (g) | 500 gram (g) |
| Heatsink material type | Aluminum | Aluminum |
| Number of heatsink fins | - |
Heat pipe features
Heat pipe features
| Number of Heat Pipes | No heat pipe | - |
|---|---|---|
| Heat Pipe Type | - | U-shaped |
| Heat Pipe Material and Contact Surface | - | Copper |
| Heat Pipe Diameter | - | 6 millimeter (mm) |
| Processor Contact Surface Type | - |
Fan features
Fan features
| Fan Core Technology | ||
|---|---|---|
| Fan Speed Control System | ||
| Maximum Airflow Capacity (CFM) | 43.4 cubic feet per minute (cfm) | 43.1 cubic feet per minute (cfm) |
| Fan Electrical Connector Type | 3-pin | 4-pin PWM |
| Maximum Air Pressure (mm/H2O) | - | 2.63 mm H₂O |
| Fan Operating Voltage | - | 12 volt (v) |
| Fan Power Consumption | - | 0.15 ampere (a) |
Cooling system details
Cooling system details
| Maximum nominal rotation speed | 2000 RPM | 2200 RPM |
|---|---|---|
| Minimum nominal rotation speed | - | 800 RPM |
Air conditioning features
Air conditioning features
| Maximum noise produced | 22 decibel (db) | 30 decibel (db) |
|---|---|---|
| Minimum noise produced | - | 17 decibel (db) |
Aesthetic features
Aesthetic features
| Lighting | No | No |
|---|
General features
General features
| Mounting Method on Motherboard | Horizontal | Vertical |
|---|---|---|
| Maximum heat dissipation power | - | |
| Overall dimensions | 53 * 108 * 112 millimeter (mm) | 89.5 * 108 * 138.5 millimeter (mm) |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Green Tinycool 90 Rev11
0
/10
from total 1 Vote
Cooler Master Hyper 103
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
