Deepcool Alta 9
VS
Cooler Master Masterair Ma410P
Feature Comparison
Fan features
Fan features
| Fan Core Technology | - | |
|---|---|---|
| Fan Speed Control System | - | |
| Maximum Airflow Capacity (CFM) | 42.35 cubic feet per minute (cfm) | 66.7 cubic feet per minute (cfm) |
| Fan Operating Voltage | 12 volt (v) | 12 volt (v) |
| Fan Power Consumption | 0.2 ampere (a) | 0.28 ampere (a) |
| Maximum Air Pressure (mm/H2O) | - | 2.34 mm H₂O |
| Fan Electrical Connector Type | - | 4-pin PWM |
Cooling system details
Cooling system details
| Maximum nominal rotation speed | 2200 RPM | 2000 RPM |
|---|---|---|
| Minimum nominal rotation speed | - | 650 RPM |
Air conditioning features
Air conditioning features
| Maximum noise produced | 26.3 decibel (db) | - |
|---|
Aesthetic features
Aesthetic features
| Lighting | No | Yes |
|---|---|---|
| Total Device Weight | 208 gram (g) | - |
General features
General features
| Mounting Method on Motherboard | Horizontal | Vertical |
|---|---|---|
| Maximum power consumption | - | |
| Overall dimensions | 58 * 113 * 113 millimeter (mm) | - |
Heat sink details
Heat sink details
| Heat Sink Size | - | 60 * 116 * 158.5 millimeter (mm) |
|---|---|---|
| Heatsink weight | - | 420 gram (g) |
| Heatsink material type | - | Aluminum |
Heat pipe features
Heat pipe features
| Heat Pipe Type | - | U-shaped |
|---|---|---|
| Heat Pipe Material and Contact Surface | - | Copper |
| Heat Pipe Diameter | - | 6 millimeter (mm) |
| Processor Contact Surface Type | - |
Lighting features
Lighting features
| Lighting system type | - | |
|---|---|---|
| Lighting connector type | - | 3-pin |
| Lighting voltage | - | 5 volt (v) |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Deepcool Alta 9
0
/10
from total 1 Vote
Cooler Master Masterair Ma410P
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
