Price Comparison
No stores registered at this time
VS
Deepcool Ag300
VS
Cooler Master Masterair Ma620M
Feature Comparison
Heat sink details
Heat sink details
| Heat Sink Size | 57 * 94 * 129 millimeter (mm) | - |
|---|---|---|
| Heatsink material type | Aluminum | Aluminum |
Heat pipe features
Heat pipe features
| Heat Pipe Diameter | 6 millimeter (mm) | - |
|---|---|---|
| Heat Pipe Type | - | U-shaped |
| Heat Pipe Material and Contact Surface | - | Copper |
Fan features
Fan features
| Fan Speed Control System | ||
|---|---|---|
| Maximum Airflow Capacity (CFM) | 36.75 cubic feet per minute (cfm) | 57.3 cubic feet per minute (cfm) |
| Maximum Air Pressure (mm/H2O) | 2.89 mm H₂O | 2.0 mm H₂O |
| Fan Electrical Connector Type | 4-pin | 4-pin PWM |
| Fan Operating Voltage | 12 volt (v) | 12 volt (v) |
| Fan Core Technology | - | |
| Fan Power Consumption | - | 0.16 ampere (a) |
Cooling system details
Cooling system details
| Minimum nominal rotation speed | 500 RPM | 600 RPM |
|---|---|---|
| Maximum nominal rotation speed | 3050 RPM | 2000 RPM |
Air conditioning features
Air conditioning features
| Maximum noise produced | 30.5 decibel (db) | 30 decibel (db) |
|---|---|---|
| Minimum noise produced | - | 8 decibel (db) |
Aesthetic features
Aesthetic features
| Lighting | No | Yes |
|---|---|---|
| Total Device Weight | 350 gram (g) | 1620 gram (g) |
General features
General features
| Overall dimensions | 77 * 119 * 129 millimeter (mm) | 125 * 135 * 165 millimeter (mm) |
|---|---|---|
| Mounting Method on Motherboard | - | Vertical |
Lighting features
Lighting features
| Lighting system type | - | |
|---|---|---|
| Lighting connector type | - | 3-pin |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Deepcool Ag300
0
/10
from total 1 Vote
Cooler Master Masterair Ma620M
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
