Deepcool Neptwin V3
VS
Cooler Master Standard Cooler I30
Feature Comparison
Heat sink details
Heat sink details
| Heat Sink Size | 108 * 120 * 158 millimeter (mm) | - |
|---|---|---|
| Heatsink material type | Aluminum | Aluminum |
Heat pipe features
Heat pipe features
| Heat Pipe Type | U-shaped | - |
|---|---|---|
| Heat Pipe Material and Contact Surface | Copper | - |
| Heat Pipe Diameter | 6 millimeter (mm) | - |
Fan features
Fan features
| Fan Core Technology | ||
|---|---|---|
| Fan Speed Control System | - | |
| Maximum Airflow Capacity (CFM) | 56.5 cubic feet per minute (cfm) | 31 cubic feet per minute (cfm) |
| Maximum Air Pressure (mm/H2O) | 1.66 mm H₂O | 2.21 mm H₂O |
| Fan Electrical Connector Type | 4-pin PWM | 3-pin |
| Fan Operating Voltage | 12 volt (v) | 12 volt (v) |
| Fan Power Consumption | 0.22 ampere (a) | 0.13 ampere (a) |
Cooling system details
Cooling system details
| Minimum nominal rotation speed | 500 RPM | - |
|---|---|---|
| Maximum nominal rotation speed | 1500 RPM | 2600 RPM |
Air conditioning features
Air conditioning features
| Maximum noise produced | 27 decibel (db) | 28 decibel (db) |
|---|
Aesthetic features
Aesthetic features
| Lighting | Yes | No |
|---|---|---|
| Total Device Weight | 1039 gram (g) | - |
Lighting features
Lighting features
| Lighting system type | - |
|---|
General features
General features
| Mounting Method on Motherboard | Vertical | - |
|---|---|---|
| Overall dimensions | 126 * 133 * 158 millimeter (mm) | 55 * 95 * 95 millimeter (mm) |
| Maximum power consumption | - |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Deepcool Neptwin V3
0
/10
from total 1 Vote
Cooler Master Standard Cooler I30
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
