Price Comparison
No stores registered at this time
VS
Deepcool As500 Plus Wh
VS
Silverstone Xe02 Sp3
Feature Comparison
Heat sink details
Heat sink details
| Heat Sink Size | 49 * 140 * 159 millimeter (mm) | - |
|---|---|---|
| Heatsink material type | Aluminum | Aluminum |
Heat pipe features
Heat pipe features
| Heat Pipe Type | U-shaped | U-shaped |
|---|---|---|
| Heat Pipe Material and Contact Surface | Copper | Copper |
| Heat Pipe Diameter | 6 millimeter (mm) | - |
Fan features
Fan features
| Fan Core Technology | ||
|---|---|---|
| Fan Speed Control System | ||
| Maximum Airflow Capacity (CFM) | 70.81 cubic feet per minute (cfm) | 43 cubic feet per minute (cfm) |
| Maximum Air Pressure (mm/H2O) | 1.14 mm H₂O | 21.8 mm H₂O |
| Fan Electrical Connector Type | 4-pin PWM | 4-pin PWM |
| Fan Operating Voltage | 12 volt (v) | - |
| Fan Power Consumption | 0.11 ampere (a) | 0.38 ampere (a) |
Cooling system details
Cooling system details
| Minimum nominal rotation speed | 500 RPM | 1600 RPM |
|---|---|---|
| Maximum nominal rotation speed | 1200 RPM | 8400 RPM |
Air conditioning features
Air conditioning features
| Maximum noise produced | 29.2 decibel (db) | 52 decibel (db) |
|---|
Aesthetic features
Aesthetic features
| Lighting | Yes | No |
|---|---|---|
| Total Device Weight | 1198 gram (g) | 565 gram (g) |
Lighting features
Lighting features
| Lighting system type | - | |
|---|---|---|
| Lighting connector type | 3-pin | - |
| Lighting voltage | 5 volt (v) | - |
General features
General features
| Overall dimensions | 102 * 142 * 164 millimeter (mm) | 64 * 79 * 117 millimeter (mm) |
|---|---|---|
| Mounting Method on Motherboard | - | Vertical |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Deepcool As500 Plus Wh
0
/10
from total 1 Vote
Silverstone Xe02 Sp3
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
