Price Comparison
VS
No stores registered at this time
Rode Ntg4 Plus
VS
Funsnap Mic Tok
Feature Comparison
General specifications
General specifications
| Equivalent Name | - |
|---|
Main features
Main features
| Number of Microphones | 1 piece | 1 piece |
|---|---|---|
| Microphone Type by Application | Shotgun | Lavalier |
| Microphone Technology Type | Condenser | Condenser |
| Connection Type | Wired | Wireless |
| Transmitter/Receiver Combination | Without independent receiver and transmitter | Transmitter and microphone integrated with independent receiver |
| Optimal Operating Range | - | 80 meter (m) |
Technical details of the microphone
Technical details of the microphone
| Diaphragm diameter size | 12.7 mm | - |
|---|---|---|
| Sound Sensitivity | ||
| Microphone Impedance | 200 ohm (Ω) | - |
| Signal-to-Noise Ratio (S/N Ratio) | 78 decibel (db) | 63 decibel (db) |
| Microphone Battery Life | Up to 150 hours | - |
| Bitrate | - | 16 bit |
| Total Harmonic Distortion (THD) | - | Less than 0.1% |
Technical features
Technical features
| Frequency Response Range | 20-20000 hertz (hz) | 100-10000 hertz (hz) |
|---|---|---|
| Noise Level | 16 decibel (db) | - |
Aesthetic features
Aesthetic features
| Body Material | Metal | - |
|---|---|---|
| Size and Dimensions | 22 * 22 * 278 millimeter (mm) | 17 x 19.2 x 54.8 mm (transmitter) / 11.2 x 23 x 75.6 mm (receiver) |
| Product Weight | 176 gram (g) | 10 g (Transmitter) / 5 g (Receiver) |
Transmitter technical details
Transmitter technical details
| Transmitter Battery Power | - | |
|---|---|---|
| Transmitter Voltage and Current Consumption | - | 3.7 volt (v) |
| Transmitter Operating Time | - | Up to 6 hours |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Rode Ntg4 Plus
0
/10
from total 1 Vote
Funsnap Mic Tok
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
