Price Comparison
VS
No stores registered at this time
Noctua Nh U14S
VS
Cooler Master Hyper 103
Feature Comparison
Heat sink details
Heat sink details
| Heatsink material type | Aluminum | Aluminum |
|---|---|---|
| Heat Sink Size | - | 91 * 96 * 138.5 millimeter (mm) |
| Heatsink weight | - | 500 gram (g) |
Heat pipe features
Heat pipe features
| Heat Pipe Material and Contact Surface | Copper | Copper |
|---|---|---|
| Heat Pipe Type | - | U-shaped |
| Heat Pipe Diameter | - | 6 millimeter (mm) |
| Processor Contact Surface Type | - |
Fan features
Fan features
| Fan Core Technology | ||
|---|---|---|
| Fan Speed Control System | ||
| Maximum Airflow Capacity (CFM) | 140.2 cubic feet per minute (cfm) | 43.1 cubic feet per minute (cfm) |
| Fan Operating Voltage | 12 volt (v) | 12 volt (v) |
| Maximum Air Pressure (mm/H2O) | - | 2.63 mm H₂O |
| Fan Electrical Connector Type | - | 4-pin PWM |
| Fan Power Consumption | - | 0.15 ampere (a) |
Cooling system details
Cooling system details
| Minimum nominal rotation speed | 300 RPM | 800 RPM |
|---|---|---|
| Maximum nominal rotation speed | 1500 RPM | 2200 RPM |
Air conditioning features
Air conditioning features
| Maximum noise produced | 24.6 decibel (db) | 30 decibel (db) |
|---|---|---|
| Minimum noise produced | - | 17 decibel (db) |
Aesthetic features
Aesthetic features
| Lighting | No | No |
|---|---|---|
| Total Device Weight | 935 gram (g) | - |
General features
General features
| Maximum power consumption | - | |
|---|---|---|
| Overall dimensions | 52 x 150 x 165 mm (without fan) / 78 x 150 x 165 mm (with fan) | 89.5 * 108 * 138.5 millimeter (mm) |
| Mounting Method on Motherboard | - | Vertical |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Noctua Nh U14S
0
/10
from total 1 Vote
Cooler Master Hyper 103
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
