Rode Wireless Go
VS
Foxxray Hades
Feature Comparison
Main features
Main features
| Number of Microphones | 1 piece | 1 piece |
|---|---|---|
| Microphone Type by Application | Lavalier | Desktop |
| Microphone Technology Type | Condenser | Condenser |
| Connection Type | Wireless | Wired |
| Transmitter/Receiver Combination | Transmitter and microphone integrated with independent receiver | Without independent receiver and transmitter |
| Optimal Operating Range | 70 meter (m) | - |
Technical features
Technical features
| Frequency Response Range | 50-20000 hertz (hz) | 20-20000 hertz (hz) |
|---|---|---|
| Noise Level | 21.8 decibel (db) | - |
Transmitter technical details
Transmitter technical details
| Transmitter Operating Time | Up to 7 hours | - |
|---|
Receiver technical details
Receiver technical details
| Receiver Operating Time | Up to 7 hours | - |
|---|
Aesthetic and supplementary features
Aesthetic and supplementary features
| Headphone Monitoring Output | 3.5mm jack | 3.5mm jack |
|---|---|---|
| Microphone Cable Length | - | 1.8 meter (m) |
Aesthetic features
Aesthetic features
| Size and Dimensions | 18.5 x 44 x 45.3 mm (transmitter) / 18.5 x 44 x 45.3 mm (receiver) | 160 * 160 * 250 millimeter (mm) |
|---|---|---|
| Product Weight | 31 g (Transmitter) / 31 g (Receiver) | 380 gram (g) |
| Body Material | - | Metal |
General specifications
General specifications
| Equivalent Name | - |
|---|
Technical details of the microphone
Technical details of the microphone
| Diaphragm diameter size | - | 14 millimeter (mm) |
|---|---|---|
| Sound Sensitivity | - | |
| Microphone Impedance | - | 150 ohm (Ω) |
| Microphone Voltage and Current Consumption | - |
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
User Rating Comparison
Rode Wireless Go
0
/10
from total 1 Vote
Foxxray Hades
0
/10
from total 1 Vote
Questions and Answers About This Comparison
No questions have been asked about this comparison yet.
Be the first to ask a question!
Your question will be displayed after approval
