Page 14 from comparison Maxeeder Mx Es1081 Kc803

12 comparisons are ready for you on this page

Compare Hopestar Party 100with Maxeeder Mx Es1081 Kc803

Feature	Hopestar Party 100	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless and Wired
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	57mm driver
Frequency Response Range	100-20000 hertz (hz)	100-10000 hertz (hz)
Signal-to-Noise Ratio (S/N Ratio)		-
Audio Input Jack Support	true	true
Audio Input Jack Type	3.5mm	3.5mm
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	true
USB Port	true	true
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	false
Voice Call Support	false	false
Hi-Res Support	false	false
IPX Resistance	No
Microphone Noise Cancelling Capability	false	false
Controller Details		Power button / EQ adjustment button / TWS button / Reset button / Light effect adjustment button / Playback control buttons
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	TWS support / Supports MP3/MAV/WMA/FLAC/APE formats / Radio playback capability
Battery Capacity	1800mAh	10000mAh
Charging Method	Via Micro USB port	Via USB Type-C port
Time to Full Charge	Approximately 5 hours	-
Power Consumption	5 volt (v)	-
Body Material	Plastic	-
Lighting	true	true
Other Design Features	Has LED display / Has handle for easy carrying	-
LED Status Indicator	true	true
Product Weight	950 gram (g)	5000 gram (g)
Impedance	-	4 ohm (Ω)
Remote Control	-	false
Available Bluetooth Version	-
Operational Range	-	10 meter (m)
Battery Technology	-	Lithium-Ion
Lighting Details	-
Size and Dimensions	-	236 * 241 * 260 millimeter (mm)

View Comparison Details

Compare Maxeeder Mx Es1081 Kc803with Mingo Jazz Jz3100

Maxeeder VS Mingo

Feature	Maxeeder Mx Es1081 Kc803	Mingo Jazz Jz3100
General Grouping	Portable	-
Connection Type	Wireless and Wired	-
Rated Output Power (PMPO)		-
Actual Output Power (RMS)		-
Driver Technical Specifications	8-inch driver	-
Frequency Response Range	100-20000 hertz (hz)	-
Signal-to-Noise Ratio (S/N Ratio)		-
Audio Input Jack Support	true	-
Audio Input Jack Type	3.5mm	-
RCA Input Port	false	-
Optical Input	false	-
Coaxial Port	false	-
TF Card Support	true	-
USB Port	true	-
Headphone Output Port	false	-
Microphone Input Port	true	-
Microphone input port type	6.35mm	-
Internal Microphone	false	-
Voice Call Support	false	-
Hi-Res Support	false	-
IPX Resistance	No	-
Microphone Noise Cancelling Capability	false	-
Controller Details		-
Bluetooth Support	true	-
NFC Support	false	-
Additional Features	Radio playback at 88 to 108 MHz	-
Battery Capacity	1800mAh	-
Charging Method	Via Micro USB port	-
Time to Full Charge	Approximately 5 hours	-
Power Consumption	5 volt (v)	-
Body Material	Plastic	-
Lighting	true	-
Other Design Features	Has LED display / Has handle for easy carrying	-
LED Status Indicator	true	-
Product Weight	950 gram (g)	-

View Comparison Details

Compare Anker Soundcore Rave Neo 2with Maxeeder Mx Es1081 Kc803

Maxeeder VS Anker

Feature	Anker Soundcore Rave Neo 2	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless and Wired
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	-
Frequency Response Range	100-20000 hertz (hz)	-
Signal-to-Noise Ratio (S/N Ratio)		-
Audio Input Jack Support	true	true
Audio Input Jack Type	3.5mm	-
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	false
USB Port	true	true
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	false
Voice Call Support	false	false
Hi-Res Support	false	false
IPX Resistance	No	IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability	false	false
Controller Details		Power button / Bluetooth button / PartyCast button / BassUp button / Lighting adjustment button / Playback control buttons
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	TWS capability support / MP3 playback format support / Ability to charge mobile phones via USB port (10.5W) / PartyCast technology for connecting two or more Anker speakers for stereo sound
Battery Capacity	1800mAh	4900mAh
Charging Method	Via Micro USB port	Via USB Type-C port
Time to Full Charge	Approximately 5 hours	Approximately 5.5 hours
Power Consumption	5 volt (v)	15W (5V / 3A)
Body Material	Plastic	Plastic
Lighting	true	true
Other Design Features	Has LED display / Has handle for easy carrying	Has handle for easy carrying
LED Status Indicator	true	true
Product Weight	950 gram (g)	4.5 kilogram (kg)
Equivalent Name	-
Remote Control	-	false
Available Bluetooth Version	-
Operational Range	-	100 meter (m)
Software Features	-	Dedicated Soundcore app for sound customization
Lighting Details	-
Size and Dimensions	-	100 * 108 * 382 millimeter (mm)

View Comparison Details

Compare Anker Soundcore Rave Neowith Maxeeder Mx Es1081 Kc803

Maxeeder VS Anker

Feature	Anker Soundcore Rave Neo	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless and Wired
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	Has passive radiator
Frequency Response Range	100-20000 hertz (hz)	-
Signal-to-Noise Ratio (S/N Ratio)		-
Audio Input Jack Support	true	true
Audio Input Jack Type	3.5mm	3.5mm
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	false
USB Port	true	true
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	true
Voice Call Support	false	true
Hi-Res Support	false	false
IPX Resistance	No	IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability	false	false
Controller Details		Power button / Volume buttons / Shared button for playback control and call answer/end / Bass Boost activation button / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	DSP technology for sound quality enhancement / BassUp technology for enhancing bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound / Ability to charge mobile phones via USB port
Battery Capacity	1800mAh	10000mAh
Charging Method	Via Micro USB port	Via USB Type-C port
Time to Full Charge	Approximately 5 hours	Approximately 4 hours
Power Consumption	5 volt (v)	45W (15V / 3A)
Body Material	Plastic	Plastic
Lighting	true	true
Other Design Features	Has LED display / Has handle for easy carrying	Has handle for easy carrying
LED Status Indicator	true	true
Product Weight	950 gram (g)	-
Equivalent Name	-
Number of Treble Drivers	-	1 piece
Treble Driver Size (Tweeter)	-	50.8 millimeter (mm)
Number of Bass Drivers	-	1 piece
Sound Sensitivity (dB)	-	98 decibel (db)
Remote Control	-	false
Available Bluetooth Version	-
Operational Range	-	20 meter (m)
Software Features	-	Dedicated Soundcore app for sound customization
Battery Technology	-	Lithium-Ion
Lighting Details	-
Size and Dimensions	-	150 * 178 * 282 millimeter (mm)

View Comparison Details

Compare Anker Soundcore Mini 3 Prowith Maxeeder Mx Es1081 Kc803

Maxeeder VS Anker

Feature	Anker Soundcore Mini 3 Pro	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	-
Frequency Response Range	100-20000 hertz (hz)	-
Signal-to-Noise Ratio (S/N Ratio)		-
Audio Input Jack Support	true	false
Audio Input Jack Type	3.5mm	-
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	false
USB Port	true	false
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	true
Voice Call Support	false	true
Hi-Res Support	false	false
IPX Resistance	No	IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability	false	false
Controller Details		Power button / Volume buttons / Shared button for playback control and call answer/end / Bluetooth activation button
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	360° Sound / BassUp technology for analyzing and enhancing bass quality
Battery Capacity	1800mAh	1800mAh
Charging Method	Via Micro USB port	Via USB Type-C port
Time to Full Charge	Approximately 5 hours	-
Power Consumption	5 volt (v)	-
Body Material	Plastic	Plastic
Lighting	true	true
Other Design Features	Has LED display / Has handle for easy carrying	-
LED Status Indicator	true	false
Product Weight	950 gram (g)	225 gram (g)
Equivalent Name	-
Remote Control	-	false
Available Bluetooth Version	-
Operational Range	-	20 meter (m)
Size and Dimensions	-	72 * 72 * 84 millimeter (mm)

View Comparison Details

Compare Awei Y200with Maxeeder Mx Es1081 Kc803

Maxeeder VS Awei

Feature	Awei Y200	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless and Wired
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	-
Frequency Response Range	100-20000 hertz (hz)	100-18000 hertz (hz)
Signal-to-Noise Ratio (S/N Ratio)		-
Audio Input Jack Support	true	true
Audio Input Jack Type	3.5mm	3.5mm
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	true
USB Port	true	false
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	true
Voice Call Support	false	true
Hi-Res Support	false	false
IPX Resistance	No	No
Microphone Noise Cancelling Capability	false	true
Controller Details		Power button / Touch control for source selection, volume adjustment, playback control, and call answer/end
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	360-degree Hi-Fi sound / HD voice call quality / Supports ape, flac, wav, wma, mp3 formats / Simultaneous connection to multiple devices
Battery Capacity	1800mAh	2500mAh
Charging Method	Via Micro USB port	Via Micro USB port
Time to Full Charge	Approximately 5 hours	Approximately 2 hours
Power Consumption	5 volt (v)	-
Body Material	Plastic	Plastic
Lighting	true	false
Other Design Features	Has LED display / Has handle for easy carrying	-
LED Status Indicator	true	true
Product Weight	950 gram (g)	380 gram (g)
Output Power Details	-	2 x 4.5W
Microphone Noise Cancellation Technology	-	CVC noise cancellation technology
Remote Control	-	false
Available Bluetooth Version	-
Operational Range	-	10 meter (m)
Battery Technology	-	Lithium Polymer

View Comparison Details

Compare Jbl Go 3with Maxeeder Mx Es1081 Kc803

Maxeeder VS Jbl

Feature	Jbl Go 3	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	47 x 43 mm transducer (1.5 inch)
Frequency Response Range	100-20000 hertz (hz)	110-20000 hertz (hz)
Signal-to-Noise Ratio (S/N Ratio)
Audio Input Jack Support	true	false
Audio Input Jack Type	3.5mm	-
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	false
USB Port	true	false
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	false
Voice Call Support	false	false
Hi-Res Support	false	false
IPX Resistance	No	IP67 (Dust and water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability	false	false
Controller Details		Power button / Bluetooth on/off button / Playback control button / Volume buttons
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	-
Battery Capacity	1800mAh	2.775Wh
Charging Method	Via Micro USB port	Via USB Type-C port
Time to Full Charge	Approximately 5 hours	Approximately 2.5 hours
Power Consumption	5 volt (v)	5V / 1A
Body Material	Plastic	Plastic and Fabric
Lighting	true	false
Other Design Features	Has LED display / Has handle for easy carrying	Strap attachable
LED Status Indicator	true	true
Product Weight	950 gram (g)	209 gram (g)
Remote Control	-	false
Available Bluetooth Version	-
Wireless Connection Details	-	Signal transmission power less than 8 dBm (Bluetooth connection) / Signal transmission frequency 2.402 to 2.480 GHz (Bluetooth connection) / Signal transmission modulation GFSK, π/4 DQPSK, 8DPSK
Battery Technology	-	Lithium Polymer
Size and Dimensions	-	41.3 * 75 * 87.5 millimeter (mm)

View Comparison Details

Compare Jbl Clip 4with Maxeeder Mx Es1081 Kc803

Maxeeder VS Jbl

Feature	Jbl Clip 4	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	1 x 40mm (1.5 inch)
Frequency Response Range	100-20000 hertz (hz)	100-20000 hertz (hz)
Signal-to-Noise Ratio (S/N Ratio)
Audio Input Jack Support	true	false
Audio Input Jack Type	3.5mm	-
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	false
USB Port	true	false
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	false
Voice Call Support	false	false
Hi-Res Support	false	false
IPX Resistance	No	IP67 (Dust and water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability	false	false
Controller Details		Power button / Bluetooth on/off button / Playback control button / Volume buttons
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	-
Battery Capacity	1800mAh	3.885Wh
Charging Method	Via Micro USB port	Via USB Type-C port
Time to Full Charge	Approximately 5 hours	Approximately 3 hours
Power Consumption	5 volt (v)	5V / 0.5A
Body Material	Plastic	Plastic and Fabric
Lighting	true	false
Other Design Features	Has LED display / Has handle for easy carrying	Has mounting clip
LED Status Indicator	true	true
Product Weight	950 gram (g)	239 gram (g)
Remote Control	-	false
Available Bluetooth Version	-
Wireless Connection Details	-	Signal transmission power less than 10 dBm (Bluetooth connection) / Signal transmission frequency 2.400 to 2.483 GHz (Bluetooth connection) / Signal transmission modulation GFSK, π/4 DQPSK, 8DPSK
Battery Technology	-	Lithium Polymer
Size and Dimensions	-	46 * 86.3 * 134.5 millimeter (mm)

View Comparison Details

Compare Anker Soundcore Flare Miniwith Maxeeder Mx Es1081 Kc803

Maxeeder VS Anker

Feature	Anker Soundcore Flare Mini	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	Use of neodymium magnet / Has two passive radiators
Frequency Response Range	100-20000 hertz (hz)	-
Signal-to-Noise Ratio (S/N Ratio)		-
Audio Input Jack Support	true	false
Audio Input Jack Type	3.5mm	-
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	false
USB Port	true	false
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	true
Voice Call Support	false	true
Hi-Res Support	false	false
IPX Resistance	No	IPX7 (Water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability	false	false
Controller Details		Power button / Volume buttons / Shared button for playback control and call answer/end / Lighting adjustment button / Shared button for Bluetooth activation and PartyCast
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	360° Sound / DSP technology for sound quality enhancement / BassUp technology for enhancing bass quality / PartyCast technology for connecting two or more Anker speakers for stereo sound
Battery Capacity	1800mAh	2600mAh
Charging Method	Via Micro USB port	Via Micro USB port
Time to Full Charge	Approximately 5 hours	Approximately 3.5 hours
Power Consumption	5 volt (v)	-
Body Material	Plastic	Plastic
Lighting	true	true
Other Design Features	Has LED display / Has handle for easy carrying	Strap attachable
LED Status Indicator	true	true
Product Weight	950 gram (g)	480 gram (g)
Equivalent Name	-	Anker A3167
Output Power Details	-	2 x 5W
Remote Control	-	false
Available Bluetooth Version	-
Operational Range	-	20 meter (m)
Battery Technology	-	Lithium-Ion
Lighting Details	-
Size and Dimensions	-	72 * 86 * 141 millimeter (mm)

View Comparison Details

Compare Hiska B193with Maxeeder Mx Es1081 Kc803

Maxeeder VS Hiska

Feature	Hiska B193	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless and Wired
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	2 x 76.2mm drivers
Frequency Response Range	100-20000 hertz (hz)	120-20000 hertz (hz)
Signal-to-Noise Ratio (S/N Ratio)		90 decibel (db)
Audio Input Jack Support	true	true
Audio Input Jack Type	3.5mm	3.5mm
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	true
USB Port	true	true
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	true
Voice Call Support	false	true
Hi-Res Support	false	false
IPX Resistance	No	No
Microphone Noise Cancelling Capability	false	false
Controller Details		Power button / Light effect adjustment button / Source selection button / Shared buttons for playback control, call, and radio
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	Radio playback capability / TWS support / CE, RoHS certifications
Battery Capacity	1800mAh	3600mAh
Charging Method	Via Micro USB port	Via Micro USB port
Time to Full Charge	Approximately 5 hours	Approximately 5 hours
Power Consumption	5 volt (v)	-
Body Material	Plastic	Plastic
Lighting	true	true
Other Design Features	Has LED display / Has handle for easy carrying	Shoulder strap attachable
LED Status Indicator	true	true
Product Weight	950 gram (g)	974 gram (g)
Impedance	-	4 ohm (Ω)
Remote Control	-	false
Available Bluetooth Version	-
Operational Range	-	10 meter (m)
Lighting Details	-	RGB lighting
Size and Dimensions	-	116 * 123 * 283 millimeter (mm)

View Comparison Details

Compare Jbl Flip 6with Maxeeder Mx Es1081 Kc803

Maxeeder VS Jbl

Feature	Jbl Flip 6	Maxeeder Mx Es1081 Kc803
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless
Rated Output Power (PMPO)		-
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	45 x 80 mm woofer / Has two passive radiators
Frequency Response Range	100-20000 hertz (hz)	63-20000 hertz (hz)
Signal-to-Noise Ratio (S/N Ratio)
Audio Input Jack Support	true	false
Audio Input Jack Type	3.5mm	-
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	false
USB Port	true	false
Headphone Output Port	false	false
Microphone Input Port	true	false
Microphone input port type	6.35mm	-
Internal Microphone	false	false
Voice Call Support	false	false
Hi-Res Support	false	false
IPX Resistance	No	IP67 (Dust and water resistant up to 1 meter deep for up to 30 minutes)
Microphone Noise Cancelling Capability	false	false
Controller Details		Power button / Bluetooth on/off button / Playback control button / Volume buttons / PartyBoost button
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	PartyBoost technology for connecting two or more JBL speakers for stereo sound
Battery Capacity	1800mAh	4800 mAh
Charging Method	Via Micro USB port	Via USB Type-C port
Time to Full Charge	Approximately 5 hours	Approximately 2.5 hours
Power Consumption	5 volt (v)	-
Body Material	Plastic	Plastic
Lighting	true	false
Other Design Features	Has LED display / Has handle for easy carrying	Has strap
LED Status Indicator	true	false
Product Weight	950 gram (g)	550 gram (g)
Speaker Design	-
Number of Treble Drivers	-	1 piece
Treble Driver Size (Tweeter)	-	16 millimeter (mm)
Tweeter Amplifier Power	-
Number of Bass Drivers	-	1 piece
Bass Driver Size	-	80 millimeter (mm)
Woofer Amplifier Power	-
Remote Control	-	false
Available Bluetooth Version	-
Wireless Connection Details	-	Signal transmission power less than 10 dBm (Bluetooth connection) / Signal transmission frequency 2.4000 to 2.4835 GHz (Bluetooth connection) / Signal transmission modulation GFSK, π/4 DQPSK, 8DPSK
Software Features	-	Dedicated JBL PORTABLE app for sound customization
Battery Technology	-	Lithium Polymer
Size and Dimensions	-	68 * 72 * 178 millimeter (mm)

View Comparison Details

Compare Maxeeder Mx Es1081 Kc803with Tsco Ts 2319

Maxeeder VS Tsco

Feature	Maxeeder Mx Es1081 Kc803	Tsco Ts 2319
General Grouping	Portable	Portable
Connection Type	Wireless and Wired	Wireless and Wired
Rated Output Power (PMPO)
Actual Output Power (RMS)
Driver Technical Specifications	8-inch driver	-
Frequency Response Range	100-20000 hertz (hz)	100-18000 hertz (hz)
Signal-to-Noise Ratio (S/N Ratio)		-
Audio Input Jack Support	true	true
Audio Input Jack Type	3.5mm	3.5mm
RCA Input Port	false	false
Optical Input	false	false
Coaxial Port	false	false
TF Card Support	true	true
USB Port	true	true
Headphone Output Port	false	false
Microphone Input Port	true	true
Microphone input port type	6.35mm	6.35mm
Internal Microphone	false	false
Voice Call Support	false	false
Hi-Res Support	false	false
IPX Resistance	No	No
Microphone Noise Cancelling Capability	false	false
Controller Details
Bluetooth Support	true	true
NFC Support	false	false
Additional Features	Radio playback at 88 to 108 MHz	Radio playback capability
Battery Capacity	1800mAh	1200mAh
Charging Method	Via Micro USB port	Via Micro USB port
Time to Full Charge	Approximately 5 hours	-
Power Consumption	5 volt (v)	-
Body Material	Plastic	Plastic
Lighting	true	false
Other Design Features	Has LED display / Has handle for easy carrying	Shoulder strap attachable
LED Status Indicator	true	false
Product Weight	950 gram (g)	650 gram (g)
Sound Sensitivity (dB)	-	85 decibel (db)
Remote Control	-	false
Available Bluetooth Version	-
Operational Range	-	10 meter (m)
Battery Technology	-	Lithium-Ion
Standby Battery Life	-	20 hour (h)
Size and Dimensions	-	81 * 89 * 220 millimeter (mm)

View Comparison Details