SilverNet BASE 500-90 Wireless Bridge/Repeater

Specifications

Data transmission
Data transmission SilverNet BASE 500-90 Wireless Bridge/Repeater
Maximum data transfer rate
500 Mbit/s
Maximum transfer distance
6000 m
29% better than others
Supported data transfer rates
500Mbps
Antenna
Antenna SilverNet BASE 500-90 Wireless Bridge/Repeater
Antenna design
Internal
Antenna gain level (max)
13 dBi
Pan/tilt-axis range
180°
Antennas quantity
1
Wireless LAN features
Wireless LAN features SilverNet BASE 500-90 Wireless Bridge/Repeater
Wi-Fi
Yes
76% have it
Wi-Fi band
Single-band (5 GHz)
Top Wi-Fi standard
Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)
867 Mbit/s
Frequency band
5.1 - 5.8 GHz
Transmission gain
0 - 13 dB
Signal strength
-40 dBm
Channels quantity
25 channels
Modulation
16-QAM, 64-QAM, 256-QAM, BPSK, QPSK
Receiver sensitivity
-82dBm@54Mbps, -74dBm@300Mbps, [email protected]
Output power (dBm)
26
40% better than others
Indoor range
6000 m
68% better than others
Outdoor range
6000 m
72% better than others
Network
Network SilverNet BASE 500-90 Wireless Bridge/Repeater
Ethernet LAN
Yes
66% have it
Ethernet LAN interface type
Gigabit Ethernet
Ethernet LAN data rates
10,100,1000 Mbit/s
Networking standards
IEEE 802.11a, IEEE 802.11ac, IEEE 802.11i, IEEE 802.11n, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Cabling technology
10/100/1000Base-T(X)
Full duplex
Yes
66% have it
Auto MDI/MDI-X
Yes
57% have it
Static IP
Yes
93% have it
Dynamic IP
Yes
72% have it
Ports & interfaces
Ports & interfaces SilverNet BASE 500-90 Wireless Bridge/Repeater
Connectivity technology
Wired & Wireless
Ethernet LAN (RJ-45) ports
1
Security
Security SilverNet BASE 500-90 Wireless Bridge/Repeater
Security algorithms
256-bit AES, SNMP, SNMPv2, SSH
Security features
802.1x, 802.11i, 802.1Q
MAC address filtering
Yes
88% have it
Authentication method
WPA2 AES
Management features
Management features SilverNet BASE 500-90 Wireless Bridge/Repeater
Management platform
SNMP V2
Web-based management
Yes
57% have it
DHCP client
Yes
77% have it
Features
Features SilverNet BASE 500-90 Wireless Bridge/Repeater
Product type
Network bridge
Product colour
White
Remote control function
Yes
72% have it
LED indicators
LAN, Signal strength
Automatic Transmit Power Control (ATPC)
Yes
81% have it
Wall mountable
Yes
87% have it
Reset button
Yes
62% have it
International Protection (IP) code
IP67
Surge protection
Yes
82% have it
Quality of Service (QoS) support
Yes
76% have it
Network Time Protocol (NTP) client
Yes
58% have it
Mean time between failures (MTBF)
60000 h
System requirements
System requirements SilverNet BASE 500-90 Wireless Bridge/Repeater
Minimum system requirements
Internet Explorer, Google Chrome, Mozilla Firefox
Compatible operating systems
Microsoft Windows, Mac OS, Linux Distributions
Power
Power SilverNet BASE 500-90 Wireless Bridge/Repeater
Power source type
PoE
AC input voltage
100-240 V
Power supply
15.4 W
65% better than others
DC input voltage
24 - 48 V
Power consumption (typical)
6 W
55% better than others
Power consumption (max)
16 W
15% better than others
Power over Ethernet (PoE)
Yes
87% have it
Power over Ethernet (PoE) voltage
48 V
40% better than others
Power plug type
Type G
Operational conditions
Operational conditions SilverNet BASE 500-90 Wireless Bridge/Repeater
Operating temperature (T-T)
-20 - 70 °C
Operating relative humidity (H-H)
0 - 95%
Storage temperature (T-T)
-40 - 90 °C
Storage relative humidity (H-H)
0 - 95%
Certificates
Certificates SilverNet BASE 500-90 Wireless Bridge/Repeater
Certification
CE, FCC
Weight & dimensions
Weight & dimensions SilverNet BASE 500-90 Wireless Bridge/Repeater
Antenna diameter
48 cm
71% better than others
Width
450 mm
39% better than others
Depth
170 mm
72% better than others
Height
65 mm
39% better than others
Weight
2.3 kg
89% better than others
Packaging content
Packaging content SilverNet BASE 500-90 Wireless Bridge/Repeater
Packaging content
Includes 1 x radio, 1 x PoE injector PSU and 1 x Tilt and Swivel 3 Axis mounting bracket.
Grounding
Yes
81% have it
PoE+ Injector(s)
Yes
83% have it
Mounting bracket(s) included
Yes
82% have it
Power supply included
Yes
68% have it
Antenna included
Yes
77% have it
Quick installation guide
Yes
58% have it
Packaging data
Packaging data SilverNet BASE 500-90 Wireless Bridge/Repeater
Package width
215 mm
81% better than others
Package depth
605 mm
42% better than others
Package height
140 mm
31% better than others
Package weight
2.91 kg
37% better than others
Package type
Box
Quantity per pack
1 pc(s)
Logistics data
Logistics data SilverNet BASE 500-90 Wireless Bridge/Repeater
UK Trade Tariff code
85176200
51% better than others
Country of origin
United Kingdom
Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them
Nolan Brooks
Reviewed by
Nolan Brooks Storage Systems Analyst & Network Engineer Versus Wizard

The SilverNet BASE 500-90 emerges as a dedicated solution within the wireless bridge and repeater category, designed to extend network coverage and establish point-to-point or point-to-multipoint wireless links. Its core function revolves around enhancing network connectivity in environments where wired infrastructure is impractical or cost-prohibitive. This device is engineered for robustness and reliable performance, aiming to provide a stable wireless backbone for various applications, from extending Wi-Fi signals to creating outdoor network bridges.

Understanding the critical role of seamless data transmission, the BASE 500-90 is built to handle demanding network conditions. Its specifications suggest a focus on delivering consistent throughput and minimizing latency, which are crucial for applications such as surveillance systems, inter-building connectivity, or providing internet access to remote locations. The device's category, 'بریج و ریپیتر' (Bridge and Repeater), clearly defines its purpose: to intelligently connect networks or repeat wireless signals, thereby overcoming distance limitations and signal obstructions inherent in traditional networking setups. This makes it a valuable component for network administrators seeking to optimize their wireless infrastructure.

Pros & Cons

Pros
What we love about this product
    • Extended Network Reach: Capable of functioning as a bridge or repeater to significantly extend the range of existing wireless networks.
    • Versatile Deployment: Suitable for establishing point-to-point or point-to-multipoint wireless links, offering flexibility in network design.
    • Dedicated Wireless Solution: Specifically designed for bridging and repeating, ensuring optimized performance for these core tasks.
Cons
Points to consider before buying
    • Limited Advanced Features: As a dedicated bridge/repeater, it may lack the comprehensive routing and management features found in full-fledged wireless routers.
    • Specific Use Case Focus: Primarily designed for network extension and bridging, potentially limiting its utility as a primary network access point.

Users’ rating for this product

0.0 /5
Total votes: 1
(0)
Excellent 0 Vote
Very Good 0 Vote
Average 0 Vote
Weak 0 Vote
Very Weak 1 Vote

User Reviews and Ratings

Write at least 10 characters

Questions and Answers

Write at least 5 characters

Search Product for Comparison