Features Equip 2-Port Cat.5e RJ45 Network Splitter
Cable standard	Cat5e
Product colour	Silver
Housing material	Acrylonitrile butadiene styrene (ABS)
Connector contacts plating	Gold
Magnetically shielded	Yes 82% have it
Cable length	0.15 m 73% better than others
Plug and Play	Yes 93% have it

Ports & interfaces

Ports & interfaces Equip 2-Port Cat.5e RJ45 Network Splitter
Ethernet LAN (RJ-45) ports	2
Connector gender	Male

Certificates

Certificates Equip 2-Port Cat.5e RJ45 Network Splitter
Certification	RoHS, CE

Weight & dimensions

Weight & dimensions Equip 2-Port Cat.5e RJ45 Network Splitter
Width	188.5 mm 28% better than others
Depth	56 mm 77% better than others
Height	24 mm 23% better than others
Weight	39 g 49% better than others

Packaging content

Packaging content Equip 2-Port Cat.5e RJ45 Network Splitter
Quantity per pack	1 pc(s)

Packaging data

Packaging data Equip 2-Port Cat.5e RJ45 Network Splitter
Package width	180 mm 55% better than others
Package depth	240 mm 17% better than others
Package height	24 mm 93% better than others
Package weight	45 g 95% better than others

Disclaimer: Information on this page may need review. If you notice any discrepancies, please report them

Reviewed by

Nolan Brooks Storage Systems Analyst & Network Engineer Versus Wizard

In the intricate landscape of network infrastructure, the need for efficient and cost-effective solutions for expanding connectivity is paramount. The Equip 2-Port Cat.5e RJ45 Network Splitter emerges as a straightforward yet effective tool designed to address this common requirement. While not a sophisticated managed switch or a high-speed router, this passive device serves a specific, valuable purpose: allowing a single Ethernet cable run to be utilized for two separate network connections. This is particularly useful in scenarios where running additional cabling is impractical or cost-prohibitive, such as in older office buildings or residential setups where only one data port is available.

Understanding its function is key; this is not a device that doubles your internet speed or creates new network ports from thin air. Instead, it ingenifies the existing infrastructure by splitting the signal of a Cat.5e cable. This means that one physical cable can deliver network connectivity to two devices, albeit with the caveat that the total bandwidth is shared. For basic networking tasks, such as connecting two computers in a small office, a VoIP phone and a PC, or a smart TV and a gaming console to a single wall outlet, this splitter offers a simple, plug-and-play solution. Its reliance on passive technology means no external power is required, further simplifying installation and reducing potential points of failure.

Pros & Cons

Pros

What we love about this product

Cost-Effective Expansion: Enables the use of a single Ethernet cable for two network connections, reducing the need for additional cabling.
Passive Operation: Requires no external power supply, making installation simple and reducing energy consumption.
Compact Design: Its small form factor allows for easy placement behind devices or in tight spaces.
Cat.5e Compliance: Supports data rates suitable for standard Fast Ethernet (10/100 Mbps) and basic Gigabit Ethernet (1000 Mbps) applications where bandwidth is not saturated.

Cons

Points to consider before buying

Bandwidth Sharing: The available bandwidth of the single Ethernet cable is shared between the two connected devices, potentially impacting performance for high-demand applications.
Limited to 10/100 Mbps for True Parallel Use: While Cat.5e supports Gigabit, true parallel use of both ports simultaneously with Gigabit speeds might not be reliably achieved due to signal degradation and the passive nature of the splitter. It's best suited for 10/100 Mbps or for scenarios where only one port is heavily utilized at a time.
Not a Switch: Does not provide the intelligent traffic management, collision detection, or port isolation found in network switches.